Herringbone and Chevron Floors in Torrance
Hardwood Floors Oak Torrance covers herringbone and chevron wood floors in Torrance — the two classic zigzag patterns, how they are cut and laid, the waste they create and the flat subfloor they ask for.
Bookings aren't open yet. Leave your name and number; your message is recorded, and you'll get one message when a local installer is available.
Illustration
Herringbone or chevron?
Both patterns are made from short planks laid at an angle, but the ends are cut differently.
| Herringbone | Chevron | |
|---|---|---|
| End of each plank | Square cut | Angled cut, usually 45° to 60° |
| Look | Staggered, like a weave | Continuous V-lines, like arrows |
| Layout | Easier to start | Needs a precise center line |
| Waste | Typically lower | Typically higher |
Engineered and solid planks both come in pattern cuts. Many are sold as a left and a right plank that are laid alternately.
What the numbers show
- Centre line The pattern is laid out from a straight line so both walls look the same.
- Herringbone plank Every plank is the same short rectangle.
- Right-angle joint Each plank meets the next at a right angle; chevron cuts the ends at an angle instead.
- Border plank A straight border frames the pattern at the wall.
What the pattern asks of the room
Pattern floors are less forgiving than straight rows, because every misaligned joint is visible. The subfloor has to be flat to the maker's limit, the layout line is set from the room's center rather than a wall, and a border or a border row is chosen so the pattern ends neatly at doorways.
Waste is part of the plan: more cut ends mean more offcuts, and the installer allows for it in the order. A pattern floor in a small entry costs more per square foot than the same pattern in a large room, because the layout work is the same.
What a pattern floor typically costs in Torrance
| Subfloor | Per sq ft | 300 sq ft |
|---|---|---|
| Wood subfloor | $14–$24 | $4,200–$7,200 |
| Concrete slab, glue-down | $16–$27 | $4,800–$8,100 |
Removal of an old floor, stairs and trim are separate. Market estimates, not quotes; specialty patterns vary widely by product.
Herringbone and Chevron Floors — common questions
Is herringbone harder to sand later?
It can be sanded like other wood floors, but the grain runs in two directions, so the finish work is slower and a careful refinisher is worth asking about.
Herringbone and Chevron Floors: check availability and price range
Bookings aren't open yet — a typical Torrance range in about 30 seconds.